DAEX25SHF-4 Steered High Flux 25mm Exciter 20W

High output exciter design

$57.72
RRP $63.08
SAVE $5.36 (8%)
Availability:
8-14 days


Calculate Shipping

The DAEX25SHF 25 mm steered high flux exciter is the most powerful in Dayton Audio's line of exciters. A pre-attached 3M VHB adhesive ring combines with four screw-down mounting tabs for maximum energy transfer.


Dayton Audio's DAEX25SHF-4 steered high flux exciter can generate a force 4 times greater than most standard sound exciters. It has a specially designed neodymium motor system that imparts strong forces, on even the most rigid surface, for maximum loudness.

For use with small, Class D amplifiers, the steered high flux exciter incorporates a 4 ohm voice coil to extract maximum power. A wide frequency response is permitted due to this exciter's low inductance.

Four screw holes are integrated into the exciter's shell and combine with a 3M VHB (Very High Bond), permitting this exciter to be securely coupled to a wide range of materials, even upside-down mounting and attaching to moving objects. Two solder tabs offer quick, permanent wire attachment.

Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.

Adhesive dimensions: 15.7 mm (outside diameter)

(848791000997)

• High output exciter design
• Specially designed neodymium motor and proprietary 2-layer voice coil
• 3M™ VHB™ adhesive ring with four mounting holes
• Low inductance motor for extended response

Speaker Series Exciters
Model Number DAEX25SHF-4
Color Silver
Unit of Measure Each
UPC 848791000997
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 0.6000
Speaker Type Exciter
Power Handling (RMS) 20 watts
Power Handling (max) --
Continuous Program Power --
Impedance 4 ohms
Sensitivity --
Frequency Response --
Voice Coil Diameter 25 mm
Magnet Weight --
DC Resistance (Re) 4.3 ohms
Voice Coil Inductance (Le) 0.41 mH @ 1 kHz
Resonant Frequency (Fs) 365 Hz
Mechanical Q (Qms) --
Electromagnetic Q (Qes) --
Total Q (Qts) 0.73
Diaphragm Mass Inc. Airload (Mms) 1.3 g
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) 0.0001 mm/N
Surface Area Of Cone (Sd) --
Volume of Displacement (Vd) --
BL Product (BL) 4.29 Tm
Compliance Equivalent Volume (Vas) --
Maximum Linear Excursion (Xmax) --
Driver's Mechanical Losses (Rms) --
Entry / Exit Diameter --
Surround Material --
Voice Coil Wire Material --
Voice Coil Former --
Basket/Frame Material --
Magnet Material --
Overall Outside Diameter 54.5 mm dia.
Overall Depth 35.5 mm
Baffle Cutout Diameter --
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight --
SKU 848791000997
Model # DAEX25SHF-4
Brand Dayton Audio
Shipping Weight 0.2724kg
Shipping Width 0.102m
Shipping Height 0.051m
Shipping Length 0.102m
Shipping Cubic 0.000524m3
Assembled Length 0.102m
Assembled Height 0.051m
Assembled Width 0.102m

Be The First To Review This Product!

Help other The Loudspeaker Kit users shop smarter by writing reviews for products you have purchased.

Write a product review

comments powered by Disqus

More From This Category