DAEX32Q-8 Dual Steel Spring Balanced Exciter 32mm 20W 8 Ohm

Dual steel spider design to better support the large neo

In Stock

Calculate Shipping

When applied to vertical surfaces the Dayton Audio DAEX32Q-8 dual spring balanced exciter has more linear movement to deliver extremely accurate response while producing lower distortion.

The DAEX32Q-8 from Dayton Audio can turn most rigid, flat surfaces into a speaker. Designed specifically for mounting to vertical surfaces, this exciter uses a dual spring spider to better support the large neodymium motor providing improved linearity. With a 2-layer 32 mm voice coil, this exciter can handle up to 40 watts peak for high output even when attached to thicker surfaces. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! This exciter is perfect for turning whatever you can imagine into a speaker such as cabinet doors, monitors, windows, garage doors, ect…

Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.

Specifications: • Power handling: 20 watts RMS, 40 watts peak • VCdia: 32 mm • Nominal impedance: 8 ohms • Re: 6.5 ohms • Le: 0.36 mH • Fs (uncoupled): 324 Hz • Dimensions: 2.38" (60.5 mm) dia. x 0.78" (19.9 mm) H • Adhesive dimensions: 1.26" (32 mm) outside diameter, 0.9" (23 mm) inside diameter • Weight: 132.6 grams.


• Dual steel spider design to better support the large neodymium motor
• 32 mm two layer voice coil for high, 20 watts RMS, power handling
• Pre-applied 3M™ VHB™ adhesive for quick, secure installation
• 8 ohms impedance for easy connection to most amplifiers

Model Number DAEX32Q-8
Color Silver
Unit of Measure Each
UPC 848791001987
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 0.3000
Speaker Type Exciter
Power Handling (RMS) 20 watts
Power Handling (max) 40 watts
Continuous Program Power --
Impedance 8 ohms
Sensitivity --
Frequency Response --
Voice Coil Diameter 32 mm
Magnet Weight --
DC Resistance (Re) 6.5 ohms
Voice Coil Inductance (Le) 0.36 mH
Resonant Frequency (Fs) 580 Hz
Mechanical Q (Qms) --
Electromagnetic Q (Qes) --
Total Q (Qts) --
Diaphragm Mass Inc. Airload (Mms) --
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) --
Surface Area Of Cone (Sd) --
Volume of Displacement (Vd) --
BL Product (BL) --
Compliance Equivalent Volume (Vas) --
Maximum Linear Excursion (Xmax) --
Driver's Mechanical Losses (Rms) --
Entry / Exit Diameter --
Surround Material --
Voice Coil Wire Material --
Voice Coil Former --
Basket/Frame Material --
Magnet Material --
Overall Outside Diameter 60.5 mm dia. x 19.9 mm H
Overall Depth --
Baffle Cutout Diameter --
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight --
SKU 848791001987
Model # DAEX32Q-8
Barcode # 848791001987
Brand Dayton Audio
Shipping Weight 0.1470kg
Shipping Width 0.089m
Shipping Height 0.038m
Shipping Length 0.089m
Shipping Cubic 0.000301000m3

Be The First To Review This Product!

Help other The Loudspeaker Kit users shop smarter by writing reviews for products you have purchased.

Write a product review

comments powered by Disqus

More From This Category