PA385S-8 15" Pro Subwoofer 4" VC 8 Ohm

Thick, rigid Kevlar-paper cone resists deformation

8-14 days

Calculate Shipping

Dayton Audio PA Series subwoofers are designed and built to the same standards as popular Italian made pro audio drivers, for solid, reliable bass performance at a fraction of the price. They feature 4” quad-layer voice coils using an inside-outside windi

With over two decades of high-performance loudspeaker development experience behind them, Dayton Audio PA series subwoofers deliver powerful, dependable bass performance with all of the features and quality of pricey Italian-made pro subwoofers, but at a price that’s a whole lot easier on your budget.

Klippel Optimized Motor Structure

The Dayton Audio PA Series subwoofers feature optimized motor structures that provide over 11mm of Klippel-verified Xmax (10mm coil overhang) with excellent symmetry and linearity, preventing distortion where it often begins – in the motor itself. Cleaner bass means higher impact, and better musical detail. The enormous high-grade ceramic magnet is economical yet highly efficient and stable, providing parameters that are a drop-in replacement for most existing pro audio subwoofer enclosures, but a significant upgrade in performance to most OEM drivers.

Advanced Cooling and Ventilation

The key to reliable, high-output bass is to get the heat away from the voice coil windings. The PA Series subwoofers feature 4-inch voice coils that use inside-outside windings, improving heat transfer and reducing power compression. The coils are also wound on fiberglass formers, which are much more resistant to heat-related deformation. Finally, the high-strength motor structures employ extensive venting, below the spider, through the pole piece, and into the gap itself.

Rugged, Reliable Construction

The heavy-duty cones used on the PA Series subwoofers contain a blend of Kevlar and paper fibers, for strength, rigidity, and durability, and the ribbed cone structure provides the necessary stiffness to withstand punishing bass transients. The cone and voice coil assembly is supported by a rugged long-throw suspension featuring dual spiders and a treated and deep-corrugated triple-roll surround, for clean and low-distortion stroke. The cone is coated to withstand incidental exposure to liquid, and the dust cap is anchored by a heavy bead of epoxy for dependable cone integrity. It’s all held together by the finest adhesives and a tough cast-aluminum frame that’s ready to take some road abuse.

When you’re looking for a dependable, heavy-duty subwoofer driver to power your system’s low end through anything, choose the PA Series pro subwoofers from Dayton Audio!

The 15” model is optimized for maximum punch in compact vented enclosures or folded horn applications. 18” model also available.


Sealed Volume 1.03 ft.³
Sealed F3 80 Hz
Vented Volume 2.40 ft.³
Vented F3 45 Hz


• Thick, rigid Kevlar-paper cone resists deformation
• Inside/outside wound 4" diameter voice coils for maximum motor efficiency
• Extensive motor venting for elevated power handling and cool operation
• 11mm of Klippel-verified Xmax
• Rugged cast-frame construction with premium materials

Speaker Series Pro Audio Series
Model Number PA385S-8
Color Black
Unit of Measure Each
UPC 848791001338
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 31.4500
Speaker Type Subwoofer
Nominal Diameter 15"
Power Handling (RMS) 1,000 watts
Power Handling (max) 2,000 watts
Continuous Program Power --
Impedance 8 ohms
Sensitivity 93.6 dB @ 2.83V/1m
Frequency Response 35 - 1,000 Hz
Voice Coil Diameter 100 mm
Magnet Weight --
DC Resistance (Re) 6 ohms
Voice Coil Inductance (Le) 4.3 mH
Resonant Frequency (Fs) 37.7 Hz @ 1 kHz
Mechanical Q (Qms) 7.90
Electromagnetic Q (Qes) 0.39
Total Q (Qts) 0.37
Diaphragm Mass Inc. Airload (Mms) 230g
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) 0.08 mm/N
Surface Area Of Cone (Sd) 860.5 cm²
Volume of Displacement (Vd) --
BL Product (BL) 28.9 Tm
Compliance Equivalent Volume (Vas) 80.4 liters
Maximum Linear Excursion (Xmax) 10 mm
Driver's Mechanical Losses (Rms) --
Cone / Diaphragm Material Paper / Kevlar Cone
Entry / Exit Diameter --
Surround Material Cloth
Voice Coil Wire Material Copper
Voice Coil Former Fiberglass
Basket/Frame Material Cast Aluminum
Magnet Material Ferrite
Overall Outside Diameter 388 mm
Overall Depth 173 mm
Baffle Cutout Diameter 354 mm
# Mounting Holes 8
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight --
SKU 848791001338
Model # PA385S-8
Brand Dayton Audio
Shipping Weight 14.2783kg
Shipping Width 0.483m
Shipping Height 0.254m
Shipping Length 0.483m
Shipping Cubic 0.059157m3
Assembled Length 0.483m
Assembled Height 0.254m
Assembled Width 0.483m

Be The First To Review This Product!

Help other The Loudspeaker Kit users shop smarter by writing reviews for products you have purchased.

Write a product review

comments powered by Disqus

Others Also Bought

More From This Category