RSS210HO-8 8" Reference HO Subwoofer 8 Ohm

Extensively vented motor eliminates power compression an

$280.13
Availability:
8-14 days


Calculate Shipping

The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look.


The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look.

OPTIMUM CABINET SIZE *

Sealed Volume 0.28 ft.³
Sealed F3 58 Hz
Vented Volume 0.7 ft.³
Vented F3 32 Hz
* Enclosure volume/F3s based on BassBox "optimum" calculations

(848791000348)

• Extensively vented motor eliminates power compression and allows quiet excursion
• Triple shorting-ring motor for ultra-low distortion
• Heavy-gauge aluminum cones withstand pressures of small enclosures
• 4-layer high-temperature coils for maximum power handling
• Durable aramid fiber spider for greater mechanical control
• Unique, high-end look
• Optimized for small enclosures

Speaker Series Reference Series
Model Number RSS210HO-8
Color Black
Unit of Measure Each
UPC 848791000348
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 11.7000
Speaker Type Subwoofer
Nominal Diameter 8"
Power Handling (RMS) 300 watts
Power Handling (max) 500 watts
Continuous Program Power --
Impedance 8 ohms
Sensitivity 83.5 dB @ 2.83V/1m
Frequency Response 30 - 1,500 Hz
Voice Coil Diameter 50 mm
Magnet Weight --
DC Resistance (Re) 5.9 ohms
Voice Coil Inductance (Le) 1.46 mH @ 1 kHz
Resonant Frequency (Fs) 29.6 Hz
Mechanical Q (Qms) 2.78
Electromagnetic Q (Qes) 0.45
Total Q (Qts) 0.39
Diaphragm Mass Inc. Airload (Mms) 99.3g
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) 0.29 mm/N
Surface Area Of Cone (Sd) --
Volume of Displacement (Vd) 256.6 cm³
BL Product (BL) 15.6 Tm
Compliance Equivalent Volume (Vas) 18.7 liters
Maximum Linear Excursion (Xmax) 12 mm
Driver's Mechanical Losses (Rms) --
Cone / Diaphragm Material Aluminum Cone
Entry / Exit Diameter --
Surround Material Rubber
Voice Coil Wire Material --
Voice Coil Former --
Basket/Frame Material Cast Aluminmun
Magnet Material Ferrite
Overall Outside Diameter 213 mm
Overall Depth 126 mm
Baffle Cutout Diameter 185 mm
# Mounting Holes 6
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight --
SKU 848791000348
Model # RSS210HO-8
Brand Dayton Audio
Shipping Weight 5.3118kg
Shipping Width 0.241m
Shipping Height 0.165m
Shipping Length 0.241m
Shipping Cubic 0.009613m3
Assembled Length 0.241m
Assembled Height 0.165m
Assembled Width 0.241m

Be The First To Review This Product!

Help other The Loudspeaker Kit users shop smarter by writing reviews for products you have purchased.

Write a product review

comments powered by Disqus

Others Also Bought



More From This Category