HDSK255C-BV Center Speaker Kit

Monitor Grade Speakers Using Peerless Drivers

$495.00
In Stock

Veneer
Form


Calculate Shipping

Acoustic time-aligned & coaxial single point sound source monitors


Available as Disassembled kits or Pre-Assembled units

 

Disassembled kits

•Very simple and fast assembly procedure

•Screw driver is the only tool required

 

 

Pre-Assembled units

•Ready to be used speaker towers

•Tested and tuned by a professional

Acoustic time-aligned & coaxial single point sound source monitors

The Peerless HDSK255C audiophile high definition centre speaker is optimised to be mounted horizontally for front and centre positioning. Crystal clear highs, tight fast bass, with a beautifully articulated forward mid-range presence with low distortion and low compression gives incredible impact in sound and transports the realism right into your living room!  
Although the Mid-Bass drivers are NOT magnetically shielded this will not affect LCD & Plasma screens.
This exceptional speaker is electronically optimised for the horizontal axis with particular attention paid in development to achieve the best vocals for most natural realism possible. When matched with other HDS speakers in a home theatre setup, gives a new level of pinpoint focus imaging to sound effects and their location relative to the screen just as the director intended. The Peerless HDSK250c can be matched with the Peerless HDSK150 satellites, HDSK250 sister speakers or the floor standing HDS455. Also recommended is the XLS1000 or XLS800 subwoofers to complete your ultimate home theatre experience.


Sold in singles for centre channel horizontal mounting
Frequency Response 47Hz to 25KHz
Size H495 x W180 x D305mm 15Kg
Recommended amplifier 10W to 150Wrms
Impedance 4 ohm
Nominal Sensitivity 92dB
New mains for HiFi Systems
Surround sound for Large rooms
Matches with our subwoofers See our HDSK800 or HDSK1000
Big sound from a small enclosure
Time-corrected, Pin-Point imaging
Premium MDF cabinet built in Australia
36mm facia thickness beveled edge
Front grill cloth on bevel wooden frame
Bevel anti-diffraction front and back
Internal Bracing to reduce resonances
All internal surfaces are carpeted
Port is bevel edged minimize turbulence
Cabinet Assembled Complete.
All holes pre-drilled.
Wadding material pre-attached to inside panels.
Speaker Grill. Assembled with cloth attached.
Printed Circuit Board.
Fully assembled with all components & wiring to terminals & back-plate.
Speaker. Mid-Bass Woofer 5" Peerless 831882 (2pcs)
Speaker. Tweeter Dome 1" Peerless 810921 (1pcs)
Set of Screws for attaching drivers and terminal socket. (20pcs)
Velcro Strips for affixing the Circuit Board to the inside of the cabinet

(20514)

Order Code HDSK255C-BV
Size 495(w)x180(h)x305(d)mm
Price Type each
Power 5 to 150W
Freq. 47Hz - 25KHz
QTY 1
Weight 15Kg
Impedance 4 Ohm (3.6 Ohm Re)
Grille Yes
Sens. 91.5dB
Woofer 831882
Manufacturer Peerless
Suits Cabinet
Crossover 3.3KHz 12/18dB/Oct
Tweeter 810921
Materials MDF+Vinyl
Impedance (Ohm) 4 Ohm
Power (RMS) 60Wrms
Inch 5"
SKU 20514
Brand DST
Shipping Weight 15.0000kg
Shipping Width 0.495m
Shipping Height 0.305m
Shipping Length 0.180m
Shipping Cubic 0.027175000m3

Be The First To Review This Product!

Help other The Loudspeaker Kit users shop smarter by writing reviews for products you have purchased.

Write a product review

comments powered by Disqus

Others Also Bought



More From This Category