TT25-8 PUCK Tactile Transducer Mini Bass Shaker

Quality construction and economically priced

$20.00
RRP $27.42
SAVE $7.42 (27%)
In Stock


Calculate Shipping

Dayton Audio's TT25-8 PUCK is a small, 8 ohm tactile transducer or mini bass shaker that is intended to be used in home theater, gaming, and auto sound applications.


Dayton Audio TT25-8 PUCK Tactile Transducer Mini Bass Shaker 8 Ohm

The PUCK™ by Dayton Audio is a small, economical tactile transducer otherwise known as a mini bass shaker that is intended to be used in home theater, gaming, and auto sound applications.

This mini bass shaker has the unique ability to transfer low frequency sound waves directly to the listener by mounting the PUCK™ to surface areas that a listener's body will come into contact with. Because the listener "feels" the low frequency, the volume of the overall sound can be kept to a minimum without sacrificing the audio quality.

The PUCK measures a mere 3-1/2" diameter and 1" depth, nearly identical in size to an ice hockey puck. The small depth and diameter of the PUCK™ mini bass shaker make it uniquely suited for tight spaces and unobtrusive applications. 4 layer Voice Coil with 1" aluminum former.

Note: Requires 6 #6 wood or sheet metal screws for surface mounting.

Dimensions: 3-3/8" dia. x 1" H • Cutout: 70 mm with 25 mm slot for wire pass through • Consult owners manual for cut-out template and wiring information.

(848791000102)

• Quality construction and economically priced
• Add tactile feedback to chairs and couches for the ultimate gaming and movie experience
• Small and easy to install

Speaker Series Tactile Transducers/Bass Shakers
Model Number TT25-8 PUCK
Color Black
Unit of Measure Each
UPC 848791000102
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 0.7500
Speaker Type Tactile Transducer
Power Handling (RMS) 15 watts
Power Handling (max) 30 watts
Continuous Program Power --
Impedance 8 ohms
Sensitivity --
Frequency Response 20 - 80 Hz
Voice Coil Diameter --
Magnet Weight --
DC Resistance (Re) 7.7 ohms
Voice Coil Inductance (Le) 1.30 mH @ 1 kHz
Resonant Frequency (Fs) 40 Hz
Mechanical Q (Qms) --
Electromagnetic Q (Qes) --
Total Q (Qts) --
Diaphragm Mass Inc. Airload (Mms) --
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) --
Surface Area Of Cone (Sd) --
Volume of Displacement (Vd) --
BL Product (BL) --
Compliance Equivalent Volume (Vas) --
Maximum Linear Excursion (Xmax) --
Driver's Mechanical Losses (Rms) --
Entry / Exit Diameter --
Surround Material --
Voice Coil Wire Material --
Voice Coil Former --
Basket/Frame Material --
Magnet Material --
Overall Outside Diameter --
Overall Depth --
Baffle Cutout Diameter --
# Mounting Holes 6
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight --
SKU 848791000102
Model # TT25-8
Brand Dayton Audio
Shipping Weight 0.3405kg
Shipping Width 0.102m
Shipping Height 0.051m
Shipping Length 0.102m
Shipping Cubic 0.000524m3
Assembled Length 0.102m
Assembled Height 0.051m
Assembled Width 0.102m

Might be mini but produce a thump

By: on 17 June 2015
Was initially worried with the actual size of the product, to my surprise the word mini is not right they produce a brilliant sound on the application we have written to drive them. What are we doing you ask ? I build 2DOF motion simulators for PC games, and we have developed our own tactile feedback software to read the games motions etc and turn these into tactile feedback for the users to feel. For example we just finished the RPM side of it , now as you rev the car or plane the puck slowly vibrates increasing with intensity as the RPM climbs , very effective. The end build will consist of 8x pucks and a 100W 4channel Class D Amp , brings a racing simulator to life.
(5)

Write a product review

comments powered by Disqus

Others Also Bought



More From This Category