TT25-8 PUCK Tactile Transducer Mini Bass Shaker
Quality construction and economically priced
Notify me when back in stock
Dayton Audio TT25-8 PUCK Tactile Transducer Mini Bass Shaker 8 Ohm
The PUCK™ by Dayton Audio is a small, economical tactile transducer otherwise known as a mini bass shaker that is intended to be used in home theater, gaming, and auto sound applications.
This mini bass shaker has the unique ability to transfer low frequency sound waves directly to the listener by mounting the PUCK™ to surface areas that a listener's body will come into contact with. Because the listener "feels" the low frequency, the volume of the overall sound can be kept to a minimum without sacrificing the audio quality.
The PUCK measures a mere 3-1/2" diameter and 1" depth, nearly identical in size to an ice hockey puck. The small depth and diameter of the PUCK™ mini bass shaker make it uniquely suited for tight spaces and unobtrusive applications. 4 layer Voice Coil with 1" aluminum former.
Note: Requires 6 #6 wood or sheet metal screws for surface mounting.
To simplify installation on flat surfaces our SMRK Surface Mounting Ring Kit allows you to mount the PUCK transducer without the need for a mounting hole.
Specifications: • Power handling: 15 watts RMS/30 watts max • Impedance: 8 ohms • Re: 7.7 ohms • Le: 1.30 mH @ 1k Hz • Fs: 40 Hz • Usable frequency response: 20 to 80 Hz • Force peak: 30 lbs. per ft. total when used in 4 PUCK configuration • Dimensions: 3-1/2" dia. x 1" H • Cutout: 70 mm with 25 mm slot for wire pass through • Consult owners manual for cut-out template and wiring information.
To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, visit Dayton Audio's website and check out their Exciter & Tactile Transducers Buyers Guider.
• Quality construction and economically priced
• Add tactile feedback to chairs and couches for the ultimate gaming and movie experience
• Small and easy to install
|Speaker Series||Tactile Transducers/Bass Shakers|
|Model Number||TT25-8 PUCK|
|Unit of Measure||Each|
|Warranty - Parts||5 Years|
|Warranty - Labor||5 Years|
|Product Shipping Weight (lbs.)||0.7500|
|Speaker Type||Tactile Transducer|
|Power Handling (RMS)||15 watts|
|Power Handling (max)||30 watts|
|Continuous Program Power||--|
|Frequency Response||20 - 80 Hz|
|Voice Coil Diameter||--|
|DC Resistance (Re)||7.7 ohms|
|Voice Coil Inductance (Le)||1.30 mH @ 1 kHz|
|Resonant Frequency (Fs)||40 Hz|
|Mechanical Q (Qms)||--|
|Electromagnetic Q (Qes)||--|
|Total Q (Qts)||--|
|Diaphragm Mass Inc. Airload (Mms)||--|
|Moving Mass Of Diaphragm (Mmd)||--|
|Mechanical Compliance of Suspension (Cms)||--|
|Surface Area Of Cone (Sd)||--|
|Volume of Displacement (Vd)||--|
|BL Product (BL)||--|
|Compliance Equivalent Volume (Vas)||--|
|Maximum Linear Excursion (Xmax)||--|
|Driver's Mechanical Losses (Rms)||--|
|Entry / Exit Diameter||--|
|Voice Coil Wire Material||--|
|Voice Coil Former||--|
|Overall Outside Diameter||--|
|Baffle Cutout Diameter||--|
|# Mounting Holes||6|
|Mounting Hole Diameter||--|
|Bolt Circle Diameter||--|
Might be mini but produce a thumpBy: Robert Lindsay on 17 June 2015Was initially worried with the actual size of the product, to my surprise the word mini is not right they produce a brilliant sound on the application we have written to drive them. What are we doing you ask ? I build 2DOF motion simulators for PC games, and we have developed our own tactile feedback software to read the games motions etc and turn these into tactile feedback for the users to feel. For example we just finished the RPM side of it , now as you rev the car or plane the puck slowly vibrates increasing with intensity as the RPM climbs , very effective. The end build will consist of 8x pucks and a 100W 4channel Class D Amp , brings a racing simulator to life.