CE38M-8 1-1/2" Mini Speaker 8 Ohm

Lightweight mylar diaphragm

$3.70
RRP $6.84
SAVE $3.14 (46%)
Availability:
8-14 days


Calculate Shipping

Dayton Audio’s CE38M-8 is a lightweight and versatile mylar-diaphragm mini speaker with a rugged plastic frame and neodymium magnet. It’s a great choice for new design or replacement use in headphones, kiosks, electronic games, or portable electronics.


The Commercial Engineering (CE) series of speaker drivers from Dayton Audio provides engineers, designers, and integrators with a line of economical small drivers that fit the diverse range of applications found in consumer electronics and audio-enabled electronic projects.

The Dayton Audio CE38M-8 1-1/2” mini speaker features a feather-light and smooth-sounding Mylar diaphragm and a lightweight injection-molded plastic frame, making it great for portable electronics and headphones. The high sensitivity also enables it to be used as a speaker in kiosks, intercoms, displays, or electronic games, and the 8-ohm impedance works with most small audio amplifiers or line-level outputs. The round frame can be press-fit or glued in place.

Note: The Mylar diaphragm is very fragile. To prevent damage, avoid contact with the diaphragm when handling. This driver should be installed behind a grille.

(848791001093)

• Lightweight mylar diaphragm
• Rugged molded plastic frame
• Powerful neodymium magnet
• Light weight, low cost

Speaker Series CE Series
Model Number CE38M-8
Unit of Measure Each
UPC 848791001093
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 0.0200
Speaker Type Mini Speaker
Nominal Diameter 1.50"
Power Handling (RMS) 0.25 watts
Power Handling (max) 0.50 watts
Continuous Program Power --
Impedance 8 ohms
Sensitivity 75 dB @ 1W/1m
Frequency Response 190 - 20,000 Hz
Voice Coil Diameter 12.5 mm
Magnet Weight --
DC Resistance (Re) 7.72 ohms
Voice Coil Inductance (Le) 0.172 mH
Resonant Frequency (Fs) 191.8 Hz
Mechanical Q (Qms) 1.59
Electromagnetic Q (Qes) 4.45
Total Q (Qts) 1.17
Diaphragm Mass Inc. Airload (Mms) 0.07g
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) 9.68 mm/N
Surface Area Of Cone (Sd) 4.91 cm²
Volume of Displacement (Vd) 0.05 cm³
BL Product (BL) 0.39 Tm
Compliance Equivalent Volume (Vas) 0.33 liters
Maximum Linear Excursion (Xmax) 0.1 mm
Driver's Mechanical Losses (Rms) --
Entry / Exit Diameter --
Surround Material --
Voice Coil Wire Material --
Voice Coil Former Mylar
Basket/Frame Material --
Magnet Material Neodymium
Overall Outside Diameter 42 mm
Overall Depth 7.6 mm
Baffle Cutout Diameter --
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight --
SKU 848791001093
Model # CE38M-8
Brand Dayton Audio
Shipping Weight 0.0091kg
Shipping Width 0.057m
Shipping Height 0.013m
Shipping Length 0.057m
Shipping Cubic 0.000041m3
Assembled Length 0.057m
Assembled Height 0.013m
Assembled Width 0.057m

Be The First To Review This Product!

Help other The Loudspeaker Kit users shop smarter by writing reviews for products you have purchased.

Write a product review

comments powered by Disqus

Others Also Bought



More From This Category