DAEX19CT-4 Coin Type 19mm Exciter 5W 4 Ohm

Small size;just under 1-1/2" diameter, about 3/8" high

$9.24
RRP $10.96
SAVE $1.72 (16%)
In Stock


Calculate Shipping

Take your product or project to the next level by turning into a speaker! The DAEX19CT-8 sound exciter, by Dayton Audio, features voice coil vent holes for higher power handling.


Dayton Audio's 19 mm DAEX19CT-4 coin type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows!

A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. Cooling holes placed strategically on this exciter's housing allows for higher power handling, for applications where more output is desired, while maintaining a small form factor.

To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible.

Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.

Adhesive dimensions: 21.5 mm (outside diameter) 21.75 mm (inside diameter)

(848791000966)

• Small size;just under 1-1/2" diameter, about 3/8" high
• Pre-applied 3M™ VHB™ adhesive for quick, durable installation
• Rare-earth neodymium motor with cooling vents for higher power handling
• 4 ohms impedance for use with small, Class D amplifiers
• Strategically-placed vent holes cool this exciter's voice coil for higher power handling

Speaker Series Exciters
Model Number DAEX19CT-4
Color Silver
Unit of Measure Each
UPC 848791000966
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 0.0500
Speaker Type Exciter
Power Handling (RMS) 5 watts
Power Handling (max) --
Continuous Program Power --
Impedance 4 ohms
Sensitivity --
Frequency Response --
Voice Coil Diameter 19 mm
Magnet Weight --
DC Resistance (Re) 3.8 ohms
Voice Coil Inductance (Le) 0.04 mH @ 1 kHz
Resonant Frequency (Fs) 637 Hz
Mechanical Q (Qms) --
Electromagnetic Q (Qes) --
Total Q (Qts) 2.34
Diaphragm Mass Inc. Airload (Mms) 0.58 g
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) 0.0001 mm/N
Surface Area Of Cone (Sd) --
Volume of Displacement (Vd) --
BL Product (BL) 1.78 Tm
Compliance Equivalent Volume (Vas) --
Maximum Linear Excursion (Xmax) --
Driver's Mechanical Losses (Rms) --
Entry / Exit Diameter --
Surround Material --
Voice Coil Wire Material --
Voice Coil Former --
Basket/Frame Material --
Magnet Material --
Overall Outside Diameter 33 mm dia.
Overall Depth 13 mm
Baffle Cutout Diameter --
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight --
SKU 848791000966
Model # DAEX19CT-4
Brand Dayton Audio
Shipping Weight 0.0227kg
Shipping Width 0.038m
Shipping Height 0.013m
Shipping Length 0.051m
Shipping Cubic 0.000025m3
Assembled Length 0.051m
Assembled Height 0.013m
Assembled Width 0.038m

Be The First To Review This Product!

Help other The Loudspeaker Kit users shop smarter by writing reviews for products you have purchased.

Write a product review

comments powered by Disqus

Others Also Bought



More From This Category