DAEX19QLP-4 Quad Feet Low Profile 19mm Exciter

Rare-earth neodymium motor and a proprietary vented voic

In Stock

Calculate Shipping

Turn almost anything with a flat surface into a speaker. The Dayton Audio DAEX19QLP-4 4 ohm sound exciter improves power handling with a vented voice coil.

Dayton Audio's DAEX19QLP-4 quad arm exciter is built with four arms that extend out from the main exciter body, which allows this exciter to transfer sound to a much larger surface for lower frequency response extension (more bass). Also, the arms help to support the magnet/voice coil improving linearity when mounted on horizontal surfaces.

A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 0.75" voice coil allows for more input power, creating rich, dynamic sound. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body, and the four arms ... just peel and stick!

Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.


• Rare-earth neodymium motor and a proprietary vented voice coil
• 4 ohms impedance for use with small, Class D amplifiers
• Four arms provide extra support improving linearity
• Turns any flat, rigid surface into a speaker

Speaker Series Exciters
Model Number DAEX19QLP-4
Color Black
Unit of Measure Each
UPC 848791001765
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 0.1000
Speaker Type Exciter
Power Handling (RMS) 5 watts
Power Handling (max) --
Continuous Program Power --
Impedance 4 ohms
Sensitivity --
Frequency Response --
Voice Coil Diameter 19 mm
Magnet Weight --
DC Resistance (Re) 3.5 ohms
Voice Coil Inductance (Le) 0.13 mH @ 1 kHz
Resonant Frequency (Fs) 450 Hz
Mechanical Q (Qms) --
Electromagnetic Q (Qes) --
Total Q (Qts) --
Diaphragm Mass Inc. Airload (Mms) --
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) --
Surface Area Of Cone (Sd) --
Volume of Displacement (Vd) --
BL Product (BL) --
Compliance Equivalent Volume (Vas) --
Maximum Linear Excursion (Xmax) --
Driver's Mechanical Losses (Rms) --
Entry / Exit Diameter --
Surround Material --
Voice Coil Wire Material --
Voice Coil Former --
Basket/Frame Material --
Magnet Material --
Overall Outside Diameter 57 mm dia.
Overall Depth 12 mm H
Baffle Cutout Diameter --
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight --
SKU 848791001765
Model # DAEX19QLP-4
Barcode # 848791001765
Brand Dayton Audio
Shipping Weight 0.0400kg
Shipping Width 0.076m
Shipping Height 0.025m
Shipping Length 0.083m
Shipping Cubic 0.000160000m3

Be The First To Review This Product!

Help other The Loudspeaker Kit users shop smarter by writing reviews for products you have purchased.

Write a product review

comments powered by Disqus

Others Also Bought

More From This Category