ES180TiA-8 7" Esoteric Series Woofer 8 Ohm

Now with improved frequency response for easier crossove

$210.58
RRP $246.89
SAVE $36.31 (15%)
Availability:
8-14 days


Calculate Shipping

The Dayton Audio ES180TiA-8 is a high-tech 7" woofer featuring an FEA-optimized neodymium ring motor structure with dual copper shorting rings for ultra-low distortion. Its enormous 3" edge-wound voice coil on a titanium former provides high power handlin


Dayton Audio's Esoteric Series is the ultimate expression of Dayton Audio’s transducer engineering knowledge and finesse. Featuring high-end materials and advanced engineering throughout, the Esoteric Series collection of drivers elevates the state of the art in driver design. Now with a flatter frequency response and smoother high frequency roll-off allowing for extended bandwidth and easier crossover integration.

The ES180TiA-8 7” woofer is a technological tour de force, with a fully FEA- and Klippel-optimized design from the powerful neodymium motor assembly with dual shorting rings to the moving structure with large 3” voice coil, titanium voice coil former, and tightly woven glass fiber cone. The voice coil is edgewound using rectangular copper-coated aluminum wire (CCAW) for maximum conductor density within the magnetic gap. The motor structure has been optimized using magnetic finite element analysis (FEA) to provide a symmetrical and extended flux field along the length of the gap, to permit longer excursion beyond the traditional limits in loudspeaker motor design. Dual shorting rings reduce coil inductance by shorting eddy currents created by the coil when it moves, for greatly reduced distortion. A titanium voice coil former was chosen to transmit motor force with maximum efficiency and minimal deformation of the coil former, for supreme resolution. The woven glass fiber cone supports the high force generated by the motor assembly with less deflection than other cone materials. Even the suspension system has been Klippel-optimized for excellent linearity. The attention to detail doesn’t end there – even the voice coil leads are tethered to the black Conex spider to eliminate mechanical resonance.

All of these elements combine to create a driver that breaks new ground with superb transient response and ultra-low distortion. By breaking free from established design conventions and rethinking how each part of the driver should behave, the ES180TiA-8 consistently delivers a musically accomplished performance, time after time. It works well as the woofer in a 2-way high-performance loudspeaker system, and the 8-ohm impedance makes it a natural choice for dual woofer configurations.

Optimum Cabinet Size

Sealed Volume 0.19 ft.³
Sealed F3 71 Hz
Vented Volume 0.57 ft.³
Vented F3 40 Hz

(848791002632)

• Now with improved frequency response for easier crossover integration
• Dual copper shorting rings in the motor for reduced energy storage
• 3" edgewound voice coil on titanium former provides exceptional transient response
• Woven glass-fiber cone provides excellent stiffness for minimal cone flex
• High excursion suspension design with tethered tinsel leads and fully ventilated frame
• High-power, ultra-low-distortion design

Speaker Series Esoteric Series
Model Number ES180TiA-8
Color Black
Unit of Measure Each
UPC 848791002632
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 2.8000
Speaker Type Woofer
Nominal Diameter 7"
Power Handling (RMS) 100 watts
Power Handling (max) 200 watts
Continuous Program Power --
Impedance 8 ohms
Sensitivity 84.8 dB @ 2.83V/1m
Frequency Response 35 - 5,500 Hz
Voice Coil Diameter 75 mm
Magnet Weight --
DC Resistance (Re) 7.4 ohms
Voice Coil Inductance (Le) 1.13 mH @ 1 kHz
Resonant Frequency (Fs) 33.7 Hz
Mechanical Q (Qms) 4.90
Electromagnetic Q (Qes) 0.44
Total Q (Qts) 0.40
Diaphragm Mass Inc. Airload (Mms) 26.8g
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) 0.84 mm/N
Surface Area Of Cone (Sd) 132.7 cm²
Volume of Displacement (Vd) 70.3 cm³
BL Product (BL) 9.8 Tm
Compliance Equivalent Volume (Vas) 20.7 liters
Maximum Linear Excursion (Xmax) 5.3 mm
Driver's Mechanical Losses (Rms) --
Cone / Diaphragm Material Nomex Cone
Entry / Exit Diameter --
Surround Material Rubber
Voice Coil Wire Material CCA
Voice Coil Former Titanium
Basket/Frame Material Cast Aluminum
Magnet Material Neodymium
Overall Outside Diameter 175 mm
Overall Depth 74.3 mm
Baffle Cutout Diameter 148.3 mm
# Mounting Holes 6
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight --
SKU 848791002632
Model # ES180TiA-8
Barcode # 848791002632
Brand Dayton Audio
Shipping Weight 1.2939kg
Shipping Width 0.203m
Shipping Height 0.127m
Shipping Length 0.203m
Shipping Cubic 0.005244m3

Be The First To Review This Product!

Help other The Loudspeaker Kit users shop smarter by writing reviews for products you have purchased.

Write a product review

comments powered by Disqus

More From This Category