MA1240a Multi-Zone 12 Channel Amplifier
Stable Class AB design delivers superior audiophile soun
Notify me when back in stock
The Dayton Audio MA1240a features a Class-AB output circuit that delivers superior audiophile sound quality and stable performance. Each of your installation's zones can benefit from the MA1240a's clean audio reproduction and exceptional functionality. The MA1240a can be stacked with other audio components and includes removable ears for mounting in standard audio racks (2RU).
Two common or BUS inputs feed audio signals from standard line-level audio sources to any or all channels. Each of the twelve channels has its own dedicated input and independent level adjustment to provide further flexibility. By simply flipping a single switch, two channels can be bridged to increase the total power output for that zone. This is helpful when extra power is needed in certain areas.
The MA1240a's manual, automatic on/off, or triggered 12V input turn-on modes facilitate easy integration into automated systems. For quick and easy troubleshooting of the system, each pair of channels or zones has a bi-color LED to indicate its operational status.
*NOTE: See setup addendum when using in-wall volume controls. You can find this resource under 'Product Manuals' listed above.
• Independent and bus inputs provides unparalleled flexibility
• Bridgeable channel outputs provide additional power when needed
• Independent channel gain controls allow the output of each speaker to be perfectly matched
• Multi-stage protection circuitry for reliability and easy troubleshooting of audio system
• Temperature controlled cooling fans
• ENERGY STAR and CE EuP directive compliant, consumes less than 1/2 a watt in standby
|Unit of Measure||Each|
|Warranty - Parts||5 Years|
|Warranty - Labor||5 Years|
|Product Shipping Weight (lbs.)||38.0000|
|Amplifier Type||Multi-Zone Amplifiers|
|Power Output||40 Watts per channel RMS at 8 ohms 80 Watts per channel RMS at 8 ohms (Bridged)|
|Power Output (RMS @ 70V) Range||--|
|Output Connectors||Phoenix, RCA|
|Output Types||4 ohms, 8 ohms|
|Input Impedance||18K ohm|
|Signal-to-Noise Ratio||105 dB A-weighted|
|THD @ Rated Power||.005% THD 20 Hz-20 kHz @ 30W (8 ohm) .010% THD 20 Hz-20 kHz @ 80W (8 ohm) (Bridged)|
|Low Pass Adjustment||--|
|Frequency Response||5 Hz to 72 kHz|
|Voltage Requirement||115/230 VAC, 60/50 Hz|
|Stand-by Power Rating||115V, 0.264W|
|Special Features||Multi-stage protection circuitryRack mountableIndependent channel gain controls12 channels(6 stereo zones)Individual channel inputs (plus BUS 1 & 2)|
Be The First To Review This Product!
Help other The Loudspeaker Kit users shop smarter by writing reviews for products you have purchased.