DS270-PR 10" Designer Series Passive Radiator
Smooth, low-distortion bass performance
Notify me when back in stock
The Dayton Audio Passive Radiators are excellent general-purpose passives suitable for replacement or for new construction. A built-in mass disc offers a good starting point for most designs, and a convenient M5 threaded hole (screw included) allows different types of weights to be added if desired. Cosmetically and mechanically, the passives match the Shielded DVC line of subwoofers, with a poly coated paper cone and medium-roll rubber surround for clean excursion and long life. The possibilities with these passives are endless, from floor standing two-ways to small active/passive subwoofer systems.
Specifications: • Fs: 21.9 Hz • Vas: 105.8 liters • Qms: 3.98 • Cms: 0.6 mm/N • Mms: 88.4g • Rms: 3.1 kg/s • Sd: 353 sq. cm. • Xmax: 11 mm • Dimensions: Overall diameter: 270 mm, Cutout diameter: 227 mm, Depth: 71.4 mm.
Note: Adding mass to the passive radiator will decrease Fs and increase Qms.
Tip: As a general rule the passive radiator(s) should be able to move double the volume of air as the active woofer(s)/subwoofer(s) in the system. For example: A passive radiator system for a 10" woofer/subwoofer that has 10mm of X-max would require 2-10" passive radiators with 10mm of X-max. For single passive radiator systems, it is common to use a passive that is larger than the active woofer(s)/subwoofer(s).
• Smooth, low-distortion bass performance
• Robust construction with high-excursion design
• Elegant appearance adds class to any project
• Cosmetic match for Designer Series woofers
|Speaker Series||Designer Series|
|Unit of Measure||Each|
|Warranty - Parts||5 Years|
|Warranty - Labor||5 Years|
|Product Shipping Weight (lbs.)||1.5000|
|Speaker Type||Passive Radiator|
|Power Handling (max)||--|
|Continuous Program Power||--|
|Voice Coil Diameter||--|
|DC Resistance (Re)||--|
|Voice Coil Inductance (Le)||--|
|Resonant Frequency (Fs)||21.9 Hz|
|Mechanical Q (Qms)||3.98|
|Electromagnetic Q (Qes)||--|
|Total Q (Qts)||--|
|Diaphragm Mass Inc. Airload (Mms)||88.4g|
|Moving Mass Of Diaphragm (Mmd)||--|
|Mechanical Compliance of Suspension (Cms)||0.6 mm/N|
|Surface Area Of Cone (Sd)||353 cm²|
|Volume of Displacement (Vd)||388.3 cm³|
|BL Product (BL)||--|
|Compliance Equivalent Volume (Vas)||105.8 liters|
|Maximum Linear Excursion (Xmax)||11 mm|
|Driver's Mechanical Losses (Rms)||3.1 kg/s|
|Cone / Diaphragm Material||Coated Paper|
|Entry / Exit Diameter||--|
|Voice Coil Wire Material||--|
|Voice Coil Former||--|
|Dual Voice Coil||Yes|
|Overall Outside Diameter||270 mm|
|Overall Depth||71.4 mm|
|Baffle Cutout Diameter||227 mm|
|# Mounting Holes||5|
|Mounting Hole Diameter||--|
|Bolt Circle Diameter||--|
Be The First To Review This Product!
Help other The Loudspeaker Kit users shop smarter by writing reviews for products you have purchased.