PS95-8 3-1/2" Point Source Full-Range Driver 8 Ohm

Detailed, natural sounding full-range audio performance

In Stock

Calculate Shipping

Dayton Audio's PS95-8 3-1/2" point source full-range driver delivers the full spectrum of sound – including clear, natural highs – with excellent detail and articulation. No tweeter required!

The newest addition to Dayton Audio's successful family of Point Source full-range drivers, the PS95-8 model features a lightweight, curved-profile paper cone made of 100% natural fibers, for dynamic and articulate sound that extends from a punchy, detailed bass to the highest treble. The compact 3-1/2" size enables great sonic performance in small satellite speakers on the desktop, or in narrow "needle"-style tower cabinets for filling a larger room.

The copper-anodized aluminum phase plug of the PS95-8 is more than just beautiful – it provides enhanced dispersion and eliminates the resonance from a conventional dust cap. And the optimized, high-strength ferrite magnet structure features a copper pole cap that reduces resolution-sapping inductance and lowers distortion. Our smallest Point Source series full-range driver isn't small on engineering, or performance!


• Detailed, natural sounding full-range audio performance without distortion
• Classy copper-anodized phase plug spreads dispersion and avoids resonance
• Non-resonant cast frame enhances clarity and dynamics
• Low-mass voice coil and paper cone produce detailed, non-fatiguing sound
• Copper pole cap in motor assembly reduces inductance and distortion

Speaker Series Point Source Series
Model Number PS95-8
Color Black
Unit of Measure Each
UPC 848791001673
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 1.4000
Speaker Type Full-Range
Nominal Diameter 3.50"
Power Handling (RMS) 10 watts
Power Handling (max) 20 watts
Continuous Program Power --
Impedance 8 ohms
Sensitivity 85.56 dB @ 2.83V/1m
Frequency Response 110 - 20,000 Hz
Voice Coil Diameter 20 mm
Magnet Weight --
DC Resistance (Re) 7.1 ohms
Voice Coil Inductance (Le) 0.63 mH @ 1 kHz
Resonant Frequency (Fs) 119.8 Hz
Mechanical Q (Qms) 7.33
Electromagnetic Q (Qes) 0.80
Total Q (Qts) 0.72
Diaphragm Mass Inc. Airload (Mms) 2.2g
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) 0.79 mm/N
Surface Area Of Cone (Sd) 28.3 cm²
Volume of Displacement (Vd) 7.08 cm³
BL Product (BL) 3.83 Tm
Compliance Equivalent Volume (Vas) 0.94 liters
Maximum Linear Excursion (Xmax) 2.5 mm
Driver's Mechanical Losses (Rms) --
Cone / Diaphragm Material Polypropylene
Entry / Exit Diameter --
Surround Material Rubber
Voice Coil Wire Material Copper
Voice Coil Former Slit Kapton
Basket/Frame Material Cast Aluminum
Magnet Material Ferrite
Overall Outside Diameter 76.8 mm
Overall Depth 52.3 mm
Baffle Cutout Diameter 69.8 mm
# Mounting Holes 4
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight --
SKU 848791001673
Model # PS95-8
Barcode # 848791001673
Brand Dayton Audio
Shipping Weight 0.5870kg
Shipping Width 0.102m
Shipping Height 0.076m
Shipping Length 0.102m
Shipping Cubic 0.000787000m3

The definition of value for money

By: on 31 October 2015
I ordered two of these speakers for a portable speaker project. They handle 15 watts with ease and sound excellent at full power. It is very good at high to mid range frequencies, and superb for vocals, it's like the artist is right in front of me. The highs are accurate, the mids are just superb and even though bass is not it's strong point, the bass is crisp and lively. I recommend this product to anyone.

Write a product review

comments powered by Disqus

Others Also Bought

More From This Category