RSS210HF-4 8" Reference HF Subwoofer 4 Ohm

Extensively vented motor eliminates compression and allo

$329.00
In Stock


Calculate Shipping

The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look.





The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intermodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size.



OPTIMUM CABINET SIZE *


Sealed Volume 0.55 ft.³

Sealed F3 48 Hz

Vented Volume 1.76 ft.³

Vented F3 24 Hz

  • Enclosure volume/F3s based on BassBox "optimum" calculations





(844632062308)

• Extensively vented motor eliminates compression and allows quiet excursion
• Lightweight black anodized aluminum cone for rigidity and lower moving mass
• Suitable for sealed or vented enclosures
• Triple shorting ring motor for ultra-low distortion
• 2-layer coil for reduced back EMF
• Highest quality materials throughout for long-lasting performance


Speaker Series Reference Series
Model Number RSS210HF-4
Color Black
Unit of Measure Each
UPC 844632062308
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 8.8000
Speaker Type Subwoofer
Nominal Diameter 8"
Power Handling (RMS) 280 watts
Power Handling (max) 560 watts
Continuous Program Power --
Impedance 4 ohms
Sensitivity 85.6 dB @ 2.83V/1m
Frequency Response 27 - 1,000 Hz
Voice Coil Diameter 51 mm
Magnet Weight 50 oz.
DC Resistance (Re) 3.1 ohms
Voice Coil Inductance (Le) 0.7 mH @ 1 kHz
Resonant Frequency (Fs) 29.6 Hz
Mechanical Q (Qms) 3.25
Electromagnetic Q (Qes) 0.69
Total Q (Qts) 0.57
Diaphragm Mass Inc. Airload (Mms) 78.4g
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) 0.37 mm/N
Surface Area Of Cone (Sd) 219.0 cm²
Volume of Displacement (Vd) 197.1 cm³
BL Product (BL) 8.12 Tm
Compliance Equivalent Volume (Vas) 23.7 liters
Maximum Linear Excursion (Xmax) 9.0 mm
Driver's Mechanical Losses (Rms) --
Cone / Diaphragm Material Black Anodized Aluminum Cone
Entry / Exit Diameter --
Surround Material Rubber
Voice Coil Wire Material Copper
Voice Coil Former Aluminum
Basket/Frame Material Steel
Magnet Material Ferrite
Overall Outside Diameter 213 mm
Overall Depth 124 mm
Baffle Cutout Diameter 185 mm
# Mounting Holes 6
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight --

SKU 844632062308
Model # RSS210HF-4
Barcode # 844632062308
Brand Dayton Audio
Shipping Weight 4.0400kg
Shipping Width 0.248m
Shipping Height 0.165m
Shipping Length 0.248m
Shipping Cubic 0.010126000m3
Assembled Length 0.248m
Assembled Height 0.165m
Assembled Width 0.248m

Another great dayton driver

By: on 27 September 2016
Very, very good. Good power handling and very deep bass for its size.
(4)

Write a product review

comments powered by Disqus

Others Also Bought



More From This Category