PHT1-6 Planar Horn Tweeter 6 Ohm
Low-compression planar horn design
$289.00
In Stock
Notify me when back in stock
Planar tweeters offer a seductively smooth and richly-detailed sound, but most don’t have the ruggedness or reliability for use in pro audio and high-level studio monitoring applications. The Dayton Audio PHT1-6 Planar Horn Tweeter is different. It features a horn-loaded design that achieves the high sensitivity of many horn-loaded compression drivers, and its thermally robust Kapton diaphragm with etched aluminum conductor is rugged enough to handle the high power levels common in pro audio.
Cooling is often a problem in planar drivers, but the PHT1-6 features a large rear-mounted aluminum heatsink that is thermally coupled to the membrane’s conductor and also evacuates heat from the transducer’s rear chamber, for extended component life and the ability to withstand peaks of 160 watts (80 watts RMS) when used with a 2500 Hz minimum crossover frequency (2nd order). The 6-ohm impedance helps the PHT1-6 maintain a high sensitivity, for use with virtually any pro audio or high-efficiency midbass driver.
Specifications: • Coverage angle: 60° H x 10° V
(848791001543)
• Low-compression planar horn design
• Detailed, non-fatiguing reproduction
• Rugged, reinforced injection-molded horn flare
• Controlled, 60 degree horizontal dispersion
• High 80-watt RMS power handling
• Detailed, non-fatiguing reproduction
• Rugged, reinforced injection-molded horn flare
• Controlled, 60 degree horizontal dispersion
• High 80-watt RMS power handling
| Model Number | PHT1-6 |
|---|---|
| Unit of Measure | Each |
| UPC | 848791001543 |
| Warranty - Parts | 5 Years |
| Warranty - Labor | 5 Years |
| Product Shipping Weight (lbs.) | 2.6000 |
| Speaker Type | Tweeter |
| Power Handling (RMS) | 80 watts |
| Power Handling (max) | 160 watts |
| Continuous Program Power | -- |
| Impedance | 6 ohms |
| Sensitivity | 105 dB @ 2.83V/1m |
| Frequency Response | 2,500 - 18,000 Hz |
| Voice Coil Diameter | -- |
| Magnet Weight | -- |
| DC Resistance (Re) | 5.77 ohms |
| Voice Coil Inductance (Le) | 0.17 mH |
| Resonant Frequency (Fs) | -- |
| Mechanical Q (Qms) | -- |
| Electromagnetic Q (Qes) | -- |
| Total Q (Qts) | -- |
| Diaphragm Mass Inc. Airload (Mms) | -- |
| Moving Mass Of Diaphragm (Mmd) | -- |
| Mechanical Compliance of Suspension (Cms) | -- |
| Surface Area Of Cone (Sd) | -- |
| Volume of Displacement (Vd) | -- |
| BL Product (BL) | -- |
| Compliance Equivalent Volume (Vas) | -- |
| Maximum Linear Excursion (Xmax) | -- |
| Driver's Mechanical Losses (Rms) | -- |
| Entry / Exit Diameter | -- |
| Surround Material | -- |
| Voice Coil Wire Material | -- |
| Voice Coil Former | -- |
| Basket/Frame Material | -- |
| Magnet Material | -- |
| Overall Outside Diameter | 111 mm x 180 mm |
| Overall Depth | 80 mm |
| Baffle Cutout Diameter | 85 mm |
| Mounting Hole Diameter | -- |
| Bolt Circle Diameter | -- |
| Product Weight | -- |
| SKU | 848791001543 |
| Model # | PHT1-6 |
| Barcode # | 848791001543 |
| Brand | Dayton Audio |
| Shipping Weight | 1.1500kg |
| Shipping Width | 0.152m |
| Shipping Height | 0.102m |
| Shipping Length | 0.229m |
| Shipping Cubic | 0.003540000m3 |
| Assembled Length | 0.229m |
| Assembled Height | 0.102m |
| Assembled Width | 0.152m |
Be The First To Review This Product!
Help other The Loudspeaker Kit users shop smarter by writing reviews for products you have purchased.
